Sounds; Driver Profiles (Depending On Model); Renaming Driver Profile - Becker Ready 50 Bedienungsanleitung

>>> SETTINGS

Sounds

You can switch the Navigation device
> D
signal tone on and off. This also includes
> GB
the clicking of the touch screen buttons.
> Press the
Tones
> F
Depending on the previous setting, the
signal tones are switched on or off.
> I
> PL
• Top icon: Tones switched on
• Bottom icon: Tones switched off

Driver profiles (depending on model)

You can select 4 different driver profiles.
You select the corresponding profile by
pressing the
Profile 1 –– Profile 4
You must then restart the navigation
system.
132
button.
You restart the system by pressing on
the
The driver profiles can now be named in-
dividually. This function can be useful, for
example, if several drivers use the same
navigation system.
Many settings and regular destinations
are stored in the driver profiles.
The following .. are stored in the driver
profiles:
• Home address
• Last destinations
• Planned routes
• Blocked roads
• Last calls
• Data in the journey computer
button .
• Last GPS position
• Navigation settings
• Phone settings
• System settings
button.
Yes

Renaming driver profile

You can rename the selected profile by
pressing the button.
Name entry