Starting The Content Manager - Becker Ready 50 Bedienungsanleitung

>>> GENERAL OPERATION

Starting the Content Manager

Execute the following actions to start the
> D
Content Manager:
> GB
> F
> I
> PL
> Switch on the Navigation device
Note:
When you
Navigation device to the PC for the first
time, the PC installs all the necessary
drivers and then displays the message
"Your unit is now ready to use".
After a short time, the Navigation device
is displayed as a removable storage
medium on the computer.
36
> Click on
> Select
> Click on
When the Content Manager is started,
the program executes a number of steps
before you can start to manage your
navigation software content.
Each time the program is called, a
connection is established to the Internet
to check whether a new version of the
ContentManager is available. If a new
software version is found, the Content
.
Manager gives you the option of
installing it. We recommend that you
connect the Becker
always agree to the upgrade, if one is
available. If a new software version is
found, you have the following options:
• Click on
>
Start All Programs
computer.
.
Becker
.
Content Manager
to accept the new
Yes
software version. The new version is
downloaded and installed before you
can start the Content Manager.
on the • Click on to start the Content
No
Manager with the version already
installed.
• If the new version is a critical update,
the button will be shown instead
Exit
of the button. You must install the
No
new version, otherwise you have to
exit the application.
If you have not yet made a backup of the
navigation unit, the Content Manager will
ask you each time it starts whether you
would like to make a complete or partial
backup copy.
Note:
We recommend that you always create
the backup. Otherwise you will not be
able to restore the content in the event
of loss of data.