Setting Speed Info - Becker Ready 50 Bedienungsanleitung

>>> NAVIGATION MODE

Setting Speed info

The
Speed info
> D
to select whether speed limits are
> GB
displayed in parallel to the navigation.
You can also receive an audible warning
> F
about exceeding the speed limit.
> I
Note:
This information can only be displayed if
> PL
it is contained in the map material.
Risk of accident!
¤
The information in the map material
may be incorrect as a result of short-
term changes (road works, for
example).
The traffic situation and the local road
signs take precedence over the
navigation system information.
> In the
Warnings
press the
Speed info
The
Speed info
appears.
80
settings window allows
The following settings are available.
Setting
Show signs
settings window,
button.
settings window
In city
Meaning
Select whether speed
limits are never
displayed, always
> Confirm your selection by pressing the
displayed or only
displayed if the limit is
exceeded. Furthermore,
you can select whether
the sign should blink
when exceeding the
speed limit, by selecting
or
Always If speed limit
.
is exceeded
Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Setting Meaning
Select the amount over
Out of city
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Alert An audible signal is to
sound when exceeding
speed limits.
A speaker's voice warns
Voice
output
you of exceeding the
speed limit.
button.