Displaying Tmc Messages On The Map; Using Tmc - Becker Ready 50 Bedienungsanleitung

Displaying TMC messages on the map

Current TMC messages are displayed on
the map graphically. Sections of the
route where there are traffic problems
are highlighted blue. Arrows indicating
the traffic direction which is affected by
the traffic problem continue to be
displayed.
In addition to the coloured mark, a
warning sign is displayed on the stretch
of road affected.

Using TMC

When the Navigation device has been at-
tached to the carrier plate (power supply
with the integrated TMC antenna con-
nected), your Navigation device will re-
ceive up-to-date traffic announcements.
It is then possible to calculate dynamic
routes (traffic jam diversion).
You can also view traffic announcements
directly.
Settings for TMC can be made as
described under "The TMC button" on
page 75.
> In the main menu, press the
button.
The map overview appears.
NAVIGATION MODE
2
1
3
The message list appears when you
press .
TMC List view
You can scroll through the list using the
arrow keys or the scroll
wheel on the right-hand edge of the
screen.
The following is displayed for each traffic
announcement:
The type of problem and the street
1
number (motorway, A-road or
district road)
The distance as the crow flies from
2
the current position, and the length
and duration of the problem if
applicable
>>>
> D
> GB
> F
> I
> PL
4
85