Entering The Destination; Skipping A Destination - Becker Ready 50 Bedienungsanleitung

>>> NAVIGATION MODE

Entering the destination

(Only available when route guidance is
> D
not active.)
> GB
You can enter a destination.
> Call up the options menu for the map
> F
display.
> Press the
> I
Enter destination
> PL
You can now enter a destination as
described under "The New destination
menu" on page 44
,
address Select
Personal destinations
,
planning Select on map
).
coordinates
102
Displaying/selecting different routes
You can use the Navigation device to
display various routes.
> With the entire route displayed, press
the
can also be selected in the options of
the map display, See "Map display
button.
options" on page 96.
After a short time, the map is displayed.
Each route is calculated after each other
and displayed on the map.
( ,
Home Enter
,
Point of Interest
, , The area on the right-hand side shows
Contacts Route
or the colour key for the individual routes,
Enter geo-
the mileage for each route and the
estimated driving time.
You can select the desired route by
pressing the buttons on the right.
button. This function
Alternative

Skipping a destination

If a planned route with several destina-
tions is active, you may delete the cur-
rent destination of the route. Route guid-
ance to the next destination is then
started.
This may be necessary if a destination
was not driven to directly. The Navigation
device otherwise tries to guide you to the
current destination.
> Call up the options menu for the map
display.
> Press the
Next destination
Route guidance to the next destination is
started.
button.