Disposal; Troubleshooting - MC Crypt DJ-4500D Bedienungsanleitung

10. Disposal

In order to preserve, protect and improve the quality of environment, protect human health and utilise natural
resources prudently and rationally, the user should return unserviceable product to relevant facilities in accordance
with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as municipal waste.

11. Troubleshooting

In purchasing the record player you have acquired a product which has been designed to the state of the art and is operationally
reliable.
Problems and malfunctions may, however, still arise. We should therefore like to describe how you can eliminate certain
malfunctions yourself.
Always adhere to the safety instructions!
Problem
Appliance does not work
The appliance is working, but no
input on the sound can be heard
Reproduction
is only through one channel
The playback speed can not
be set
The playback sound is too low
or high
The playback is distorted
The pick-up arm can not be
lowered
There are distorted sounds
Repairs other than those just described should only be performed by an authorised electrician.
Solution
- Is the appliance switched on?
- Is the mains plug inserted into the mains socket?
- Check the mains socket. Does it have a regular supply of power?
- Is the audio source connected correctly to the amplifier/mixing desk?
- Has the correct phono input been selected on the amplifier/mixing desk?
- Has the volume control on the amplifier/mixing desk been set to its minimum?
- Is the amplifier/mixing desk and the loudspeakers properly connected?
- Is one of the cinch fittings incorrectly inserted?
- Is the balance control on the amplifier/mixing desk incorrectly set?
- Has the QUARZ button (14) been pressed? Press again if necessary, and the
speed adjustment is deactivated.
- Has the speed been correctly set?
- Has the stylus force been set correctly?
- Is the pick-up system (16) defective or worn down?
- Has the antiskating compensation been set correctly?
- Is the pick-up arm counterweight (24) set correctly?
- Is the record or pick-up needle dirty?
- Is the resting weight set correctly?
- Is the earthing connection incorrect?
- Has the antiskating compensation been set correctly?
33