F) Setting The Standby And Low Standby Limit Value - VOLTCRAFT SEM4500 Bedienungsanleitung

f) Setting the standby and low standby limit value

Two different limit values for standby power consumption can be set.
With some devices, the normal standby power consumption falls to an
even lower value after a certain period of time.
• If you have set the electricity tariff (see Chapter 8. e) before setting the standby
limit values, you can proceed directly to the next step.
Otherwise, setup mode must be started, see Chapter 8. c). Press the
button (7) twice to go to setting of the standby limit value, see the next step.
• Briefly press the
POWER LEVEL" flashes at the top of the dis-
play.
• Use the
to switch between the standby limit value
("STANDBY POWER LEVEL") and the low
standby limit value ("LOW STANDBY POWER
LEVEL" = symbol
• Briefly press the
for power consumption flashes.
• Change the respective flashing value with the
ton (7).
For the limit value "LOW STANDBY POWER LEVEL", set a lower limit
value than for "STANDBY POWER LEVEL".
• If no indicator is flashing, you can jump to the next setting by briefly press-
ing the (7) button or exit the setup menu by briefly pressing the
button (2).
54
button (3); "STANDBY
button (6) or
).
button (3), the limit value
button (7)
button (6) or but-