Hitachi C 7MFA Anleitung Seite 11

This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN 60745 and declared in accordance with ISO 4871.
C6MFA
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA:
C7MFA
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA:
Wear ear protection.
The typical weighted root mean square acceleration value
does not exceed 2.5 m/s
104 dB(A)
93 dB(A)
103 dB(A)
92 dB(A)
2 .
3 dB(A)
3 dB(A)
English
10