I) Frequency Measurement "Hz - VOLTCRAFT VC-540 Bedienungsanleitung

i) frequency measurement "Hz"

Please observe the sensitivity levels indicated in the technical data, which are
required for reliable frequency display.
- Turn the DMM on and select measuring range "Hz".
The symbol "Hz" for frequency measurement
appears in the display.
- Plug the red measuring line into the v measuring
jack (9) and the black measuring line into the COM
measuring jack (8).
- Connect the two measuring prods to the object to be
measured (battery, mains voltage, etc.).
- The current measured value is indicated on the
display.
- If "OL" (overload) appears on the display, you have
exceeded the measuring range.
- Remove the measuring lines from the object to be
measured after completion of the measurement and
switch off the DMM.
58