Product Description; Display Indications And Symbols - VOLTCRAFT VC-540 Bedienungsanleitung

6. ProDuCT DESCrIPTIoN

The multimeter (referred to as DMM in the following) indicates measured values on a digital
display that can be illuminated. The measured value display of the DMM comprises 5000
counts (count = smallest display value).
Automatic deactivation switches off the device after approx. 30 minutes if it is not operated.
This saves battery power and thus extends the period of operation.
The meter can be used for do-it-yourself or for professional applications up to CAT III.
There are transport protection caps in the angled plugs of the enclosed measuring lines.
Remove them before pushing the plugs into the meter sockets.
Dial switch (14)
The individual measuring functions are selected via a rotary
control. The automatic range selection "AUTO" is active for
some measuring functions. The appropriate measurement
range is set individually for each application.
If the multimeter switch is set to "OFF", the meter is switched
off. Always turn the measuring device off when it is not in use.
The figure shows the measuring function layout.

7. DISPLay INDICaTIoNS aND SymBoLS

The following symbols and information are present at the device or in the display.
AUTO Automatic range selection is active
OFF Switch position "off"
True RMS True root mean square
Call/switch off data hold function or function is active
MAXMIN Call/switch off max-min function
MAX Display of the maximum value of the current measuring series
MIN Display of the minimum value of the current measuring series
46