The Rotary Function Switch - Wetekom 9804 Bedienungsanleitung

3. Operating Elements and Connections
COM-Input (10)
This input is intended to connect the black measuring probe in all functions
(except measurements taken with the included adaptor).
3.3 Rotary Function Switch (3)
To select the desired function, set the rotary function switch to the correspond-
ing position.
~
V
A
F
hFE
Ω
µA, mA
The unit is equipped with an automatic turn off function. This means that the
unit turns off if not manipulated for about 15 minutes. To turn it on again, press
"Power" (2) twice.
AC Current and AC Voltage
DC Current and DC Voltage Measuring
AC/DC Voltage Measuring
AC/DC Current Measuring
Capacitance Measuring
Transistor Test
Diode Test
Continuity Test
Resistance Measuring
AC/DC Current Measuring
28