AEG VCR 4500 Bedienungsanleitung Seite 60

HG462ED(EN).fm Page 12 Wednesday, March 3, 2004 7:49 PM
same time on the same channel every week. While the
month digit is flashing, press
repeatedly to select "W-MO" (Example: every monday).
5) For once-only recording only
repeatedly until your desired day appears.
6) Press PLAY / or STOP /
o L
start hour appears. Next, enter the minute digit.
7) Press PLAY / or STOP /
o L
end hour appears. Next, enter the minute digit.
8) Press PLAY / or STOP /
o L
channel number appears.
9) Press PLAY / or STOP /
o L
tape speed appears.
F.FWD
10)Press / . Programme 1 is now completed.
B
•To set another timer programme, repeat steps
11)Press MENU
to exit.
12)Press FUNCTION
to activate the timer.
The indicator on the display comes on.
w
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme which has Already
Started
STOP EJECT
Press / on the VCR.
Note: STOP / on the remote control will not function in the
L
Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1) Repeat steps 1) 3)
to in the "Timer Recording" section.
2) Select the setting you want to change using
REW
/ .
s
3) Enter the correct numbers using
F.FWD
then press / .
B
4) Press MENU
to exit.
5) Press FUNCTION
to return to timer standby mode.
To Cancel or Check the Start/End Time
1) Repeat steps 1) 2)
to in the "Timer Recording".
2) Select a programme number you want to check using
PLAY STOP
/ or / . The details of selected programme
o L
appears on the TV screen. You may cancel the entire
REW
programme by pressing
3) Press MENU
to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Programme 1
Programme 2
Programme 3
9:00
Hint for Timer Recording
• If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
PLAY / or STOP /
o L
: Press PLAY / or STOP /
o L
repeatedly until the relevant
repeatedly until the relevant
repeatedly until the relevant
repeatedly until the desired
3) 10)
to .
TIMER NUMBER 1
--/--
DATE
--:--
START
--:--
END
--
CHANNEL
--
SPEED
F.FWD
/ or
B
PLAY STOP
/ or / ,
o L
/ .
s
10:00 11:00
12
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The w indicator will flash.
• If a tape is not in the VCR, timer recording cannot be
performed and the w indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the w indicator will flash. Please insert a
recordable tape.
• When all the Timer Recordings are completed, the w also
flashes. To play or eject the recorded tape, press
first, and then press
PLAY / or
o
to the beginning of the recorded programmes, press
AUTO RETURN on the VCR.
• The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer-recording mode.
• The VCR will only perform a timer recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed (the w
AUTO RETURN
indicator flashes), press
VCR will rewind to the beginning of the recorded
programme(s).
Note:
If there are any remaining programmes, press
FUNCTION to turn on the VCR and then press
AUTO RETURN . In this case, if you press any other
button once and then press
RETURN will not be carried out.
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
1) Press MENU
.
2) Press PLAY STOP
/ or / repeatedly to point to "SET
o L
F.FWD
UP", then press / .
B
3) Press PLAY STOP
/ or / to point to "AUTO
o L
F.FWD
RETURN", then press
[ON] will appear next to "AUTO RETURN".
4) Press MENU
.
Watch the Recorded Timer Programme
Press FUNCTION to turn on the VCR, then press
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
• The PWR indicator on the display comes on.
1) Press and hold down FUNCTION
5 seconds until "PL" appears on the display. The Parents
Lock is activated.
When you want to cancel it, press and hold
the remote control again for 5 seconds.
When Parents Lock is activated:
• The time will appear on the display. "PL" will appear on
the display for two seconds every minute.
• You may insert a tape. However, the VCR power will
remain off.
EJECT
• You may press to remove the tape (unless a timer
recording is programmed or has finished).
• Timer recording will take place as scheduled, even if
Parents Lock is activated. "P.L." will appear steadily on the
TV screen during the timer recording.
FUNCTION
EJECT . To rewind the tape
first
on the VCR . The
AUTO RETURN , AUTO
/ .
B
PLAY / .
o
on the remote control for
FUNCTION on
EN