Advanced Operations - AEG VCR 4500 Bedienungsanleitung

HG462ED(EN).fm Page 10 Wednesday, March 3, 2004 7:49 PM
Hi-Fi Stereo Sound System
This VCR will record and playback Hi-Fi stereo sound. In
addition it has a A2 stereo sound decoder.
This equipment will receive stereo and bilingual broadcasts
and it is possible the several ways of recording and playing back
the sound.
Selecting the Sound Mode
You can select each mode by pressing
remote control. Each mode is indicated on the TV screen as
following.
• During playback of the recorded tape in Hi-Fi mode:
Mode AUDIO OUTPUT
L Hi Fi L Audio
Stereo
R Hi Fi R Audio
L Hi Fi L Audio
L
R Hi Fi L Audio
L Hi Fi R Audio
R
R Hi Fi R Audio
L Normal Audio
Normal
R Normal Audio

Advanced Operations

Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
Note: •
If a tape includes both programmes recorded in the
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
1) Stop the tape at the desired point.
2) Press TAPE COUNTER RESET
3) Press TAPE COUNTER MEMORY
the TV screen.
4) Press REC/OTR PLAY
or /
o
STOP
•Press / when recording or playback is completed.
L
5) Press REW F.FWD
/ or /
s B
stop when the counter returns to 0:00:00 (approx.).
To Exit the Counter Memory
Press TAPE COUNTER MEMORY
from the TV screen.
Note:
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing REC/OTR .
1) Follow steps 1) to 3) in "Viewing and Recording the Same
Programme" section.
AUDIO SELECT
on the
Display on
the TV screen
STEREO
LEFT
RIGHT
-None-
to display 0:00:00.
so that "M" appears on
.
. The VCR will automatically
so that the "M" disappears
10
• Reception of stereo broadcasts:
Mode AUDIO OUTPUT
L L Audio
Stereo
R R Audio
L L Audio
L
R L Audio
L R Audio
R
R R Audio
L L+R Audio
Monaural
R L+R Audio
• During reception of bilingual broadcasts:
Mode AUDIO OUTPUT
L Main Audio
MAIN
R Main Audio
L Sub Audio
SUB
R Sub Audio
MAIN L Main Audio
SUB R Sub Audio
Note: • If you play non-Hi-Fi tapes, the VCR will play
automatically in monaural even if you select any
mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
2) Press REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
I [0:30]
I I[1:00]...
(Normal (OTR:
recording) 30 minutes)
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press DISPLAY .
• To change the recording length during an OTR
Press REC/OTR repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press STOP / .
L
• To cancel the OTR but continue recording
Press REC/OTR repeatedly until "I" appears without the
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press MENU .
2) Press PLAY / or STOP / to select "SET UP", then press
o L
F.FWD / .
B
3) Press PLAY / or STOP / to select "AUTO REPEAT".
o L
4) Press F.FWD / so that "ON" appears next to "AUTO
B
REPEAT" on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
Display on
the TV screen
STEREO
LEFT
RIGHT
-None-
Display on
the TV screen
MAIN
SUB
MAIN
SUB
I[7:30] I[8:00]
PLAY
/ .
o
EN