Electromagnetic Compatibility (Emc) - BE QUIET! DARK POWER PRO Bedienungsanleitung

450-1200 w

Seite von 120

/ 120
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

YOUR SERVICE FOR THE NEW POWER SUPPLY:

3 YEAR WARRANTY:

With every newly purchased be quiet! Dark Power PRO power supply, you receive a three year warranty, one entire

year longer than required by the law.

1 YEAR ON-SITE EXCHANGE:

Starting on the actual day of purchase, you receive the established on-site exchange service for one full year. This

service will exchange your power supply with a new one on-site within for 48 hours of your call to the be quiet! hot-

line. (This only applies for final consumers and within Germany.)

T E C H N I C A L A D V A N TA G E S

ATX12V VERSION 2.2:

With the Dark Power PRO series, be quiet! offers a power supply that corresponds to the latest ATX 12V specifica-

tions. It offers separate 12V circuits that have an advantageous effect on the dependable function of the system.

The 450, 550 and 650W models dispose of four separate 12V circuits and the 750, 850, 1000 and 1200W models

dispose of six separate 12V circuits.

PCI EXPRESS CONNECTORS:

The power supplys from the Dark Power PRO series dispose of up to five 6 or 8 pin connectors that are necessary for

the usage of PCI express graphic cards. In its basic form, every connector is a 6 pole connector that can be conver-

ted into an 8 pole connector by adding two additional pins. The 1000 and 1200W version additionally offer a fifth 6

pole connector with which the operation of a PhysX® graphic card is guaranteed.

20/24 PIN MAINBOARD CONNECTORS:

With an expandable main connector that features from 20 to 24 pins, the Dark Power PRO series is also downward

compatible with all current specifications. The following standards are supported:

• ATX Specification V2.2 and older

• BTX V1.0a

• E-ATX Server mainboards with additional 8 and 6 pin connectors

VARIABLE CABLE MANAGEMENT:

The power supply disposes of numerous, variable connection possibilities. This ensures that users can comfortably

enhance their PC with many components. The various cable strands can be varied and non-used cable strands are

simply stowed and do not disrupt the flow of air in the case.

EPS CONNECTORS:

With the two additional 6 pin and 8 pin connectors, the server and workstation mainboards can be respectively

operated.

SERIAL ATA (SATA) CONNECTORS:

Power supplys from the Dark Power PRO series are equipped with a sufficient amount of SATA connectors. The 450

and 550W models dispose of up to 7 SATA electrical connectors, the 650 and 750W models dispose of 8 SATA

electrical connectors and the 850, 1000 & 1200W models dispose of 12 SATA electrical connectors.