Mounting The Camera; A) Helmet-Mounting With "Silicone Rubber Helmet Belt" (28) - Conrad AT18 Wichtiger Hinweis

8. Mounting the Camera

This sports camera can be mounted in different ways, using the included mounting
material. Proceed as follows to ensure proper installation:
Fix camera position:
A) Turn the camera to the left to screw it on.
B) Turn the camera to the right to remove it.
a) Helmet-Mounting with "Silicone Rubber Helmet Belt" (27)
Attach the "rubber pad" (23) to the bottom of the "helmet holder" (18).
1+2# Guide the "silicone rubber helmet belt" (27) through the "helmet holder" (18).
3# Attach the "helmet holder" (18) to the "silicone rubber helmet belt" (27) at the helmet.
4# Push the camera into the "helmet holder" (18) now.
5# To ensure tight fit, adjust the camera angle.
30