Switching On The Camera; Switching Off The Camera; Inserting/Removing The Sd Card - Conrad AT18 Wichtiger Hinweis

9. Switching on the Camera.

To switch on your camera, press and hold the "ON/OFF" button (3) until the "LCD
display" (4) shows a screen (a confirmation sound sounds). The camera is in video
mode. The remaining video recording length is indicated. The first two figures repre-
sent the hours and the last two the minutes.

10. Switching off the Camera:

Press the "ON/OFF" button (3) for approx. 1 second. Two confirmation sounds
sound and the "LCD display" (4) is deactivated. When the camera is not used for
more than 10 minutes, it is automatically switched off.
Note: When the camera is connected to a computer or laptop through USB, the USB
connection must be removed before the camera can be switched off.

11. Inserting/Removing the SD Card

Ensure that the sports camera is witched off when you insert ore
remove the SD card from the "SD card slot" (9).
Ensure that the card is inserted correctly before switching on the
sports camera (when inserting the card, you can hear a "clip" sound).
The SD card can be damaged and the data stored on it can be lost or
also damaged if the SD card is not inserted all the way and then
taken into operation. The camera data may also be damaged if the
SD card is inserted or removed while the camera is switched on. If
the SD memory card is removed while the camera is on, the camera
is automatically switched off.
You can use SD memory cards of up to 8GB.
32