Delete Recording(S); Setting Of Date And Time - Conrad AT18 Wichtiger Hinweis

15. Delete Recording(s)

• Switch on the camera.
• Press and hold the "MENU" button (5) for approx. 2 seconds.
• Now press the "trigger" (2) repeatedly to go through the following three options.
- Display "NO"
- Display "ONE"
- Display "ALL"
• Press the "MENU" button (5) to select one of the three options and to execute it.
• To leave the menu, press the "trigger" (2) repeatedly until the video mode (=nor-
mal display mode) is shown.
When using SD memory cards with a high memory capacity or when
many recording files are stored on the SD memory card, wait for a
moment when calling the "delete recordings" menu. It may take longer
than usual to delete files.
The letter "D" displayed on the screen means DELETE.

16. Setting of Date and Time

• Press and hold the "MENU" button (5) for approx. 2 seconds.
• Press the "trigger" (2) repeatedly to go through the displays "
"NO" and "ONE".
• When the display "ALL" appears, press the "MENU" button (5) until the display
"Y" flashes.
Setting the year:
• The display "Y" flashes. The third digit of the year flashes. Press the "trigger" (2) to
set the desired digit (20X1-20X9). Then press the "MENU" button (5) to confirm
your input.
• The last digit of the year flashes. Press the "trigger" (2) to set the desired digit
(201X-209X). Then press the "MENU" button (5) to confirm your input.
= Do not delete any recordings
= Delete last recording
= All recordings
", " ",
35