Audio Centre And Loudspeakers - Renkforce MS-1239 Bedienungsanleitung

When drilling holes for mounting, please take care not to damage any underlying
elecric cables or gas or water pipes.
Do not drill extra holes or screw any extra screws for mounting purposes into
the case. This will damage the device.
Only operate the CD player in a horizontal or vertical position, otherwise it will
not function properly.
Make sure you position the appliance in a safe and stabile place, away from
objects that might might fall on it, thereby avoiding unwanted accidents.
Always lay the cables so that nobody can trip over or become entangled in them
and ensure that they are not in positions where they can be damaged. Cables
must not be stretched after positioning and connection.
Do not place the loudspeakers in the direct vicinity of TV sets or computer mon-
itors. The magnetic fields generated by the loudspeakers may distort the image.
In view of the variety of paints and polishes used for furniture, the base of the appliance
may leave visible residues on the furniture it is placed on as a result of the chemical
reaction. That's why do not place the device without appropriate protection on the valu-
able furniture surfaces.

Audio centre and loudspeakers

The audio centre and the loudspeakers are suitable for wall mounting. Drill two correctly positioned holes
in the wall and insert the rawlplugs into these holes.
The screws should protrude approx. 3mm from the wall.
Alternatively, you can position the speakers on the stands supplied on delivery. Press teh stand on to the
foot of the speaker until this clicks into position.
190mm
3mm
Wand
39