Renkforce MS-1239 Bedienungsanleitung Seite 34

LASER KLASSE 1
• Please make sure that you operate the device properly. Please follow the operating instructions care-
fully in doing so.
• Make sure the mains cable is not squashed, bent, damaged through sharp edges or otherwise sub-
jected to mechanical strain. Avoid excess thermal stress on the mains cable through excess heat or
cold. Do not modify the mains cable. This may damage the mains cable. A damaged power cord can
result in a life-threatening electric shock.
• If the device or its connecting cable are damaged, do not touch them. First of all, de-energize the cor-
responding mains socket (e.g. via the respective circuit-breaker) and afterwards carefully pull the
mains plug from the socket. Do not operate the device further. Take it to a specialist workshop.
• In order to completely separate the device from the electricity net, you have to pull the mains plug out of
the wall socket. It is not sufficient to turn the device off with the on/off switch.
• This product is not a toy, it is not suitable for children. Children do not understand how dangerous
electrical devices can be.
• Never position vessels or containers containing liquids, such as buckets, vases or plants, on top of
the product or in its immediate surroundings. Liquids could seep into the interior of the housing and
in doing so impair the electrical safety of the device. There is furthermore a high risk of fire or of a life-
threatening electric shock. If this is the case, de-energize the respective socket (e.g. switch off circuit
breaker) and only then pull the plug-in mains unit from the socket. Disconnect all cables from the
device. Afterwards, the product must no longer be used, bring it to a specialist workshop.
• Do not operate the device close to water, e.g. in bathrooms or near swimming pools or on wet floors
etc.
• Never touch the mains plug of the device with wet or damp hands. There is a risk of a fatal electric
shock.
• Ensure adequate ventilation of the device during operation. Do not cover the ventilation openings
with magazines, blankets, curtains or similar. Keep a minimum distance of approx. 15 cm to other
devices.
• Do not expose the device to extremely high temperatures, dripping or spraying water, strong vibra-
tion, or great mechanical strains.
34
This product is equiped with a class 1 laser. Never open the
device. A laser warning label is affixed to the device to caution
the users. Do not remove the warning sign from the appliance.
Do not open up the appliance or attempt to reach any interior
components. Never look directly into the laser beam. Laser
radiation can seriously damage your eyes.
Operating instructions
English