Filling process
Fill only air tanks which are:
suitable for final pressure and hydro static tested (check last testing date).
- LW 160 E:
Close filling valve
Close drain valves of water separators
Start compressor by switch
Check direction of rotation
Run compressor to max. pressure and check final savety valve
Connect tank to compressor. Filling valve and tank are still closed
Slowly open filling valve
Carefully open tank valve
Fill tank to desired pressure
First close tank valve
Close filling valve
Release pressure between tank and filling valve by rotating the vent screw
A hissing sound can be heard
Disconnect tank from compressor
Turn off compressor by switch
- LW 190 B:
Close filling valve
Open drain valves of water separators
Open fuel tank valve on Honda engine
Adjust choke and throttle on Honda engine
Turn switch to position 1 on Honda engine
Start Honda engine
Close drain valves of water separators
Run compressor to max. pressure and check final savety valve
Connect tank to compressor. Filling valve and tank are still closed
Slowly open filling valve
Carefully open tank valve
Fill tank to desired pressure
First close tank valve
Close filling valve
Release pressure between tank and filling valve by rotating the vent screw
A hissing sound can be heard
Disconnect tank from compressor
Turn off compressor by switch on Honda engine (position 0)
5