Introduction; Features - Omnitronic FX-524 Kill-Mixer Bedienungsanleitung

OPERATING INSTRUCTIONS
);.LOO0L[HU
For your own safety, please read this user manual carefully
before you initial start-up.
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual

1. INTRODUCTION

Thank you for having chosen a OMNITRONIC FX-524. If you follow the instructions given in this manual, we
can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC FX-524.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

1.1 Features

3-channel kill-mixer
Channels 1-3 on the frontpanel switchable between phono, line or aux • Mic 1 microphone-input via balanced
XLR-socket on the frontpanel • Mic 2 and Mic 3 microphone-input via 1/4" mono-jack on the rearpanel •
Input-sensitivity-control (gain) for each channel • 3-fold, separate tone-control (bass, middle, treble) for each
channel with extremely wide range • Kill-function (signal attenuated by -60 dB) for every tone-control via Kill-
button • High-quality and super-smooth ALPS-channel-faders • Super-smooth ALPS-crossfader replaceable
from above • Crossfader for mixing channel 1, 2 and 3 (Crossfader Assign-button) • Crossfader Punch In and
Punch Out-buttons • 2 beat-indicators at the crossfader for perfect mixing • 3 LED-level-displays (master-out
L/R and Cue Level) • Headphones-connection on the frontpanel • Headphones-output adjustable via Cue
Level-control • Additional Cue Split/Cue Mix-button • Cue Split-function: the Cue-signal is on the one side of
the headphones and the output-signal on the other side • Cue Mix-function: the adjustable mix of Cue-signal
and output-signal is on both sides of the headphones • Mixing of the headphones-signal possible via cue
mixing-fader • Output signal adjustable via master-control and balance-control • Master-Out, Booth-Out and
Rec-Out via 2 RCA-sockets each • Rec-Out independent from Master-level for records with static level •
Separately controllable monitor-output (DJ-booth) for connecting active-speakers or an additional amplifier •
High-grade kill-mixer with a convincing sound
The Kill-function makes it possible for you to cut the signal completely off by pressing the Kill-button.
16