Setting The Temperature - Philips Azur GC4250 Anleitung

C
2 Set the steam control to position 0 (= no steam).
3 Open the cap of the filling opening.
4 Tilt the iron backwards.
C
5 Fill the water tank with tap water up to the maximum level by
means of the filling cup.
Do not fill the tank beyond the MAX indication.
If the tap water in your area is very hard, we advise you to mix it
with an equal amount of distilled water or to use distilled water
only.
Do not put additives, vinegar, starch or chemically descaled water in the
water tank.
C
6 Close the cap of the filling opening.You will hear a click.

Setting the temperature

C
1 Remove the heat-resistant protective cover.
Do not leave the heat-resistant protective cover on the soleplate
during ironing.
2 Put the iron on its heel.
3 Put the mains plug in the earthed wall socket.
C
A long beep tells you that the iron has been connected to the
mains.The temperature control display lights up and 'OFF'
appears.
ENGLISH
5