Sony TAV-L1 Bedienungsanleitung Seite 76

To connect Do this
"PlayStation 2",
Connect to the scart socket
DVD player or
decoder A
decoder, the scrambled signal from
the TV tuner is output to the decoder,
then the unscrambled signal is output
from the decoder.
DVD recorder or Connect to the scart socket
VCR that supports
SmartLink B
between the system and a VCR/
DVD recorder. For more
information on SmartLink, refer to
the instruction manual supplied
with your VCR or DVD recorder.
Personal Computer Connect to the PC
(Audio signal) C
of the system (page 75).
AV amplifier D
Connect to the DVD DIGITAL
OUT on the rear of the system.
Refer to the instruction manual
supplied with your AV amplifier.
Note
Super Audio CD/MP3/Video CD
audio signals are not output from the
DVD DIGITAL OUT jack.
Connecting to the system (side)
E
Digital satellite
receiver
F
S VHS/Hi 8/DVC
camcorder
G
Headphones
76
GB
/
1. When you connect the
2. SmartLink is a direct link
5
on the rear
IN
L/G/S/I
6
R/D/D/D
4
S
L/G/
(MONO)
S/I
R/D/
D/D
To connect
Digital satellite
E
receiver
/
S VHS/Hi 8/DVC
F
camcorder
G
Headphones
Note
When connecting headphones, the lift unit does not move
even if is pressed.
Do this
Connect only to the HDMI IN 6
socket. The digital video and audio
signals are input from the digital
satellite receiver. If the digital
satellite receiver has a DVI socket
and not an HDMI socket, connect
the DVI socket to the HDMI IN 6
socket, and connect the audio
socket to the audio sockets HDMI
IN 6. The digital video and
analogue audio signals are input
from the digital satellite receiver
Note
If you use only the HDMI
connection, and the connected
equipment does not conform to PCM
output, or equipment setting is
incorrect, audio signal may not be
output. Refer to the instruction
manual supplied with the connected
equipment for settings, etc.
Connect to the S video socket
4 or the video socket
and the audio sockets
avoid picture noise, do not connect
the camcorder to the video socket
4 and the S video socket
4 at the same time. If you
connect mono equipment, connect
to the L/G/S/I sockets
set [Dual Sound] to [A] (page 41).
Connect to the i socket to listen
to sound on headphones.
.
4,
4. To
4, and