Noise Reduction; Sound Adjustment Menu - Sony TAV-L1 Bedienungsanleitung

Colour Tone
1
Press (OK) to select [Colour Tone].
2
Press M/m to select one of the following,
then press (OK).
• [Cool]: Gives the white colours a blue tint.
• [Neutral]: Gives the white colours a neutral tint.
• [Warm]: Gives the white colours a red tint.
Tip
[Warm] only appears and can be adjusted if [Picture
Mode] is set to [Custom].
Reset
Reset all the picture settings to the factory settings.
1
Press (OK) to select [Reset].
2
Press M/m to select [OK], then press
(OK).

Noise Reduction

Reduces the picture noise (snowy picture) in a weak
broadcast signal.
1
Press (OK) to select [Noise
Reduction].
2
Press M/m to select one of the options,
and then press
40
GB
(OK).
Sound Adjustment
menu
Sound Adjustment
Sound Effect
Treble
Bass
Balance
Reset
Dual Sound
Select: Set:
You can select the options listed below on the Sound
Adjustment menu. To select options, see "Navigating
through menus" (page 38).
Note
These sound settings are not effective for DVD/FM.
Sound Effect
1
Press (OK) to select [Sound Effect].
2
Press M/m to select one of the following
sound effects, then press
• [1]: Flat response.
• [2]: Emphasize bass and treble.
• [3]: Reduce bass, and emphasize treble.
• [4]: Emphasize bass, and reduce treble.
Treble/Bass/Balance
Adjusts higher-pitched sounds (Treble), adjusts
lower-pitched sounds (Bass), and emphasizes left or
right speaker balance (Balance).
1
Press (OK) to select the option.
2
Press </, to set the level, then press
(OK).
1
0
0
0
A
Back: End:
OK MENU
(OK).