Rear Panel (Xpa 1800/27000); Rear Panel (Xpa 3004) - Omnitronic XPA 3004 Bedienungsanleitung

Rear Panel (XPA 1800/27000)

No. Element
12 Circuit breaker
13 Power input
14 Speaker connectors
15 Speaker connector
16 Input jacks
17 Selector switch operating mode
18 Selector switch sensitivity

Rear Panel (XPA 3004)

No. Element
19 Circuit breaker
20 P-Con power input
21 Input jacks
22 Selector switch operating mode
23 Selector switch sensitivity
24 Speaker connectors
25 Speaker connectors
Function
The f use protects the amplifier against defects. To reset the breaker press
the button with the unit switched of f .
Used to plug in the supplied power cord
Speaker jacks and screw terminals f or channel 1 and 2
Speaker jack f or bridge operation
Optionally XLR or RCA jack f or channel 1 and 2 f or connecting units with
line lev el
ST = stereo operation, PAR = parallel operation, BRI = bridge operation
Switches the output lev el between 1.4 V and 0.775 V
Function
The f use protects the amplifier against defects. To reset the breaker press
the button with the unit switched of f .
Used to plug in the supplied power cord
XLR jacks f or channel 1 to 4 f or connecting units with line lev el
BRI = bridge operation, PAR = parallel operation, STE = stereo operation
Switches the output lev el between 1.4 V and 0.775 V
Speaker jacks and screw terminals f or channel 1 to 4
Speaker jack f or bridge operation
25