Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Determinations - Omnitronic XPA 3004 Bedienungsanleitung

Xpa pa amplifier series
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3

OPERATING DETERMINATIONS

The PA amplifiers of the XPA series with integrated limiter have been specially designed for stage and the
disco applications. The amplifiers may be used in stereo operation, parallel operation (XPA
1800/27000/3004) or in bridge operation. The amplifiers and the speakers connected are protected through
extensive protective circuits.
Power Supply
This product must only be connected to a power source
matching the v oltage and f requency stated on the
dev ice. The occupation of the connection cables is as
f ollows:
Cable
Pin
Brown
Liv e
Blue
Neutral
Y ellow/Green
Earth
The earth has to be connected! If the device will be
directly connected with the local power supply network,
a disconnection switch with a minimum opening of 3
mm at ev ery pole has to be included in the permanent
electrical installation. The dev ice must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Dev ice (RCD) with a maximum fault current of 30 mA.
Installation
Do not shake the dev ice. Avoid brute force when
installing or operating the dev ice. When choosing the
installation spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There
should not be any cables ly ing around. You endanger
y our own and the saf ety of others!
Ambient Conditions
This product was designed f or indoor use only . This
dev ice must never be operated or stockpiled in
surroundings where splash water, rain, moisture or f og
may harm the dev ice. Moisture or v ery high humidity
can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that
the dev ice is nev er exposed to the direct smoke jet and
is installed in a distance of 0.5 meters between smoke
machine and dev ice. The ambient temperature must
alway s be between -5° C and +45° C. Keep away f rom
direct insulation (particularly in cars) and heaters. The
relativ e humidity must not exceed 50 % with an ambient
temperature of 45° C. This dev ice must only be
operated in an altitude between -20 and 2000 m ov er
NN. The ambient contamination must never exceed
lev el 1 and must not be conducting, only dry. Never use
the dev ice during thunderstorms. Over voltage could
destroy the dev ice. Always disconnect the device
during thunderstorms.
Transport
Please use the original packaging if the dev ice is to be
transported.
Cleaning
Nev er use solv ents or aggressive detergents in order to
clean the dev ice! Rather use a soft and damp cloth.
Operation
Operate the dev ice only after having familiarized with its
f unctions. Do not permit operation by persons not
International
L
N
qualif ied f or operating the dev ice. Most damages are
the result of unprof essional operation!
Serial Barcode
Nev er remov e the serial barcode from the device as
this would make the guarantee v oid.
Modifications and Guarantee
Please note that damages caused by manual
modif ications on the device or unauthorized operation
by unqualif ied persons are not subject to warranty. If
this dev ice will be operated in any way dif ferent to the
one described in this manual, the product may suffer
damages and the guarantee becomes v oid.
Furthermore, any other operation may lead to dangers
like short-circuit, burns, electric shock, etc.
Avoiding Hearing Loss
By operating amplif ying systems, you can produce
excessiv e sound pressure levels that may lead to
permanent hearing loss. Please ref er to the
explanations under "Legal instructions".
Public and Industrial Use
Operating an amplif ication system in public or industrial
areas, a series of saf ety instructions have to be
f ollowed that this manual can only give in part. The
operator must theref ore inform himself on the current
saf ety instructions and consider them.
WEEE Directive
If the unit is to be put out of operation
def initiv ely, take it to a local recycling plant for a
disposal which is not harmf ul to the
env ironment. Do not dispose of as municipal waste.
Contact y our retailer or local authorities for more
inf ormation.
22

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis