Rear Panel - Omnitronic MPZ 180.6 Bedienungsanleitung

Rear panel

12 Control PRIORITY LEVEL
Adjusts the attenuation level when releasing the
chime and in case of microphone announcements
via microphone channel 3.
Inputs MIC 2 and MIC 3
13
Unbalanced 6.3 mm jacks for connecting dynamic
microphones.
Inputs LINE 1 to 3
14
Stereo RCA inputs for connecting units with line
level (e.g. CD player).
Output LINE
15
Stereo RCA output for connection to units with
line level inputs (e.g. mixer, amplifier).
Speaker zone outputs
16
Terminals for zones 1 to 6 for connecting 100 V
speakers.
Mains cable
17
For connection to a mains socket.
Clamping screw
18
For a potential ground connection.
Direct speaker output
19
• Direct output for 70 V or 100 V speakers or 4 to
16 Ω speakers and common ground connection
COM.
• The zone buttons do not affect these outputs.
Mains fuse
20
Only replace the fuse when the unit is disconnected
from the mains. Only use a fuse of the same rating
and power. The correct fuse value is specified on the
rear panel.
18 • EN