Handling And Operation; Operating Switch; Temperature Regulator; Ventilator Operation - Silvercrest LHL 2000 B1 BL Bedienungsanleitung

Handling and operation

GB
CY

Operating switch

Temperature regulator

Ventilator operation

Heating operation

Setting the temperature

8
In this chapter you receive important information for the handling and operation
of the appliance.
The operating switch 4
heating levels on and off .
The temperature regulator
By turning it clockwise a higher temperature is set,
by turning it anticlockwise a lower temperature will
be set.
♦ Ensure that the operating switch
♦ Turn the temperature regulator
♦ Set the operating switch
♦ The fan heater turns on and the operating light
♦ If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature regulator
wise to the right.
♦ Set the operating switch
♦ Turn the temperature regulator
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
This means that the heating element is now switched off .
♦ The heating element is now switched on and off automatically by the
temperature regulator
has 4 positions and switches the ventilator and the
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
4 is at position 0 (off ).
6 clockwise to the right.
4 to the position
4 to the desired operating mode (I or II).
6 clockwise to the right.
anti-clockwise until a slight click sound is heard.
6
and the temperature is kept constant.
6
6 is steplessly adjustable.
.
5 is red.
clock-
6
LHL 2000 B1