For The Safety Of Your Child; Material Damage; Unpacking And Setting Up - Silvercrest SKHL 1800 A1 Bedienungsanleitung

RP66523 KeramikHL LB4 Seite 5 Dienstag, 24. Mai 2011 9:36 09
unplug the mains plug immediately and
have the appliance inspected. The
contact data
"10. Warranty" on page 9.
3.5 Protection against injury
Warning! To avoid injury, please
observe the following information.
• Ensure that it is not possible for anyone to
trip over or to get caught up in or step on
the mainscable.
• Stay sufficiently far from the appliance to
ensure that the fan cannot suck hair or
items of clothing into the appliance.
• Once hot, if you wish to transport the
appliance, switch it off, pull out the
mains plug, and wait until the appliance
has cooled down. Otherwise you could
burn yourself on the hot surface.
• Always carry the appliance by the lift-up
carry handle 7 .
Note: As the appliance and heating coils
are supplied with a thin film of grease, there
might be a small amount of smoke and
odour the first time the appliance is used.
This is not harmful and will stop after a short
while. Please ensure meanwhile that there is
sufficient ventilation.
1. Unpack the
packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs
of damage.
SKHL 1800 A1
can be found in

4. Unpacking and setting up

appliance from the

3.6 For the safety of your child

Warning! Children often cannot
assess dangers correctly and are
injured as a result. Please therefore
observe the following:
• This product may only be used under
adult supervision to ensure that children
do not play with the appliance.
• Always take care
appliance is kept out of the reach of
children at all times.
• Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.

3.7 Material damage

Caution! To avoid material damage, please
observe the following requirements.
• Never try to revolve the appliance
manually as this might damage the motor.
Warning! Ensure that there is
sufficient distance from the wall,
fixtures and other appliances. The
distance must be at least 1.5 m to
exclude the risk of fire.
4. Select a location that complies with the
safety information
information" on page 3).
5. Select a location where the flow of hot
air is not directly aimed at people,
animals or plants.
6. Plug the mains plug into a wall socket
that complies with the technical data.
to ensure the
(see "3. Safety
5