Specifications - Co/Tech Rt150/1 Bedienungsanleitung

4.5 Removing an entire edge
1. Set the guide fence (11) to the desired position.
2. Set the adjustable fence (12) to the same thickness as you
wish to remove.
4.6 Routing recesses and profiles
1. The adjustable fence (12) should be pushed all the way into
the guide fence (11).
2. Set the guide fence (11) to the desired position.
3. If the cutter bit has a guide bushing such as a ball bearing,
only the guide must be in contact with the workpiece.
5. Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.

6. Specifications

Intended for Router with base plate up to 157 mm
335 × 850 mm, height 280 mm
Size
Circuit breaker Emergency stop/NVR switch
11 10
11 10
12 10
12
12 10