General Information - WIKA switchGAUGE PGS10 Betriebsanleitung

1. General information

1. General information
The pressure gauge described in the operating instructions has been
■
GB
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certifed to
ISO 9001 and ISO 14001.
These operating instructions contain important information on handling
■
the instrument. Working safely requires that all safety instructions and
work instructions are observed.
Observe the relevant local accident prevention regulations and general
■
safety regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in
■
the immediate vicinity of the instrument and readily accessible to skilled
personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
■
by using the product contrary to its intended use, non-compliance with
these operating instructions, assignment of insufciently qualifed skilled
personnel or unauthorised modifcations to the instrument.
The general terms and conditions, contained in the sales
■
documentation, shall apply.
Subject to technical modifcations.
■
Further information:
■
- Internet address:
- Relevant data sheet:
4
WIKA operating instructions models PGS10, PGS11 and PGS21
www.wika.de / www.wika.com
PV 20.01, PV 21.01, PV 21.02,
SP 21.01 and SP 21.03