Technical Data; Environmental Safety - Ideen Welt SP-016S Bedienungsanleitung

1. Always unplug the device before cleaning.
2. Clean the device after each use to prevent baked foodstuffs from accumulating on the
hotplates.
3. Use a slightly damp rag or paper towel to wipe the housing and hotplates (8). If necessary, a
little dishwashing detergent may be used. Take care that no liquid enters the device interior.
4. Remove more stubborn bits of food, such as burnt cheese, by applying a little cooking oil to
the hotplates. Then wipe the hotplates clean after letting sit for a short while (approx. 5 – 10
minutes).
5. Remove larger bits of food with a plastic or wooden scraper.
6. Dry all components thoroughly after cleaning and before further use.

Technical data

Power supply
Power consumption

Environmental Safety

When the device has reached the end of its service life, make it defective by disconnecting
the power plug from the socket and cutting the cord in two.
Dispose of the packaging materials in an appropriate way. Contact your local authorities
about collection points or waste separation.
Imported by:
Dirk Rossmann GmbH
Isernhägener Straße 16
30938 Burgwedel
A120111_GB_v1.0
A120111_sandMak_SP-016S_Multi_v1.0_2012_04_18.indb 12
: 220 - 240 V~ 50 Hz
: 680 - 820 W
Disposal of old electric devices.
The European directive 2002/96/EC for waste electrical and electronic
equipment (WEEE) states that used household devices should not be
disposed of with unsorted community waste. These used devices must be
collected separately from household waste in order to increase the percentage
of recovered devices and to recycle their parts, with the goal of reducing the
negative effects on human health and on the environment.
The symbol of the crossed out garbage can will be stamped onto all devices
as a reminder of the obligation to put them in a separate garbage collection.
The consumer must consult local authorities or the vendor to inform
themselves about the manner in which their device should be disposed of.
12
20/4/12 3:18 PM