Device Elements; Start Up; Operation; Dry Vacuum Cleaning - Kärcher IVC 60/12-1 Tact Ec Betriebsanleitung

Device elements

1 Power cord
2 Nameplate
3 Filter dedusting
4 Flat fold filter
5 Suction head
6 Handle of the suction head
7 Right unlocking of the placement me-
chanics
8 Intermediate ring
9 Steering roller of the dirt container
10 Stopper
11 Dirt receptacle
12 Left unlocking of the placement me-
chanics
13 Wheel
14 Suction head lock
15 Suction support
16 Steering roller of the chassis with park-
ing brake
17 Floor nozzle holder
18 Chassis
19 Drain pan
20 Handle of the dirt container
21 Holder for suction pipe
22 Connection plug of the thermal probe
23 Rotary switch for suction output (min-
max)
24 "Ready for use" indicator lamp
25 Rotating knob
26 Filter cover
27 Cable clamp
28 Push handle
29 Opening of the protective cover
30 Protective cover
31 Thermal probe
14
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose (not included)
into the suction hose connection.
 Check the fill level in the dirt container
prior to starting work and empty the
container if necessary.
 Ensure that the dirt container has been
inserted properly.
 Attach the desired accessories (not in-
cluded).
Caution
The flat pleated filter must always be in
place while vacuuming.

Dry vacuum cleaning

Caution
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond
repair.
 Dry the wet filter properly before use or
replace it with a dry one.
 Change the filter, if required, according
to instructions under the section "Main-
tenance and Care".
Note: The dirt container needs to be emp-
tied if it is full until about 3 cm below the up-
per rim.
Check the fill level of the dirt container
–
at regular intervals, as the appliance
does not shut off automatically during
dry vacuuming.
– 2
EN

Start up

Operation