Program Change - Yamaha Clavinova CLP-240 Bedienungsanleitung

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
CLP-240 CLP-230
GRANDPIANO 1 GRANDPIANO 1
VARIATION —
GRANDPIANO 2 GRANDPIANO 2
VARIATION —
E.PIANO 1 E.PIANO 1
VARIATION —
E.PIANO 2 E.PIANO 2
VARIATION —
HARPSICHORD HARPSICHORD 1
VARIATION HARPSICHORD 2
E. CLAVICHORD —
VARIATION —
VIBRAPHONE VIBRAPHONE
VARIATION —
CHURCH ORGAN CHURCH ORGAN 1
VARIATION CHURCH ORGAN 2
JAZZ ORGAN JAZZ ORGAN
VARIATION —
STRINGS STRINGS 1
VARIATION STRINGS 2
CHOIR CHOIR
VARIATION —
GUITAR GUITAR
VARIATION —
WOOD BASS —
VARIATION —
E.BASS —
VARIATION —
• When program change reception is turned OFF in the Func-
tion mode, no program change data is transmitted or received.
Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data Transmission
Transmitted every Received as 96-clock tempo timing
F8H
96 clocks when MIDI clock is set to External
Recorder start
FAH Recorder start Not received when the MIDI clock is
set to Internal.
Recorder stop
FCH Recorder stop Not received when the MIDI clock is
set to Internal.
If a signal is not received via MIDI for
more than 400 milliseconds, the
Transmitted every same processing will take place for All
FEH
200 milliseconds Sound Off, All Notes Off and Reset All
Controllers as when those signals are
received.
• Caution: If an error occurs during MIDI reception, the Damper,
Sostenuto, and Soft effects for all channels are turned off and
an All Note Off occurs.
P.C.#=Program Change number
MSB LSB P.C.#
0 122 0
0 123 0
0 112 0
0 112 1
0 122 5
0 122 88
0 122 4
0 123 4
0 122 6
0 123 6
0 122 7
0 123 7
0 122 11
0 122 12
0 123 19
0 122 19
0 122 16
0 123 16
0 122 48
0 122 49
0 122 52
0 123 52
0 122 24
0 122 25
0 122 32
0 124 32
0 122 33
0 122 35
Reception
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> [F7H]
F0H, 43H, 0nH, 7CH (n: channel number)
00H, 2DH (data length)
43H, 4CH, 20H, 20H (CL)
43H, 4CH, 50H, 27H, 30H, 32H (CLP02)
30H, 30H (version x, y)
[PANEL DATA]
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)
F7H
• Panel Data Contents
(1) 1'st Voice
(2) Dual On/Off
(3) Dual Voice
(4) Dual Balance
(5) Dual Detune
(6) Dual Voice1 Octave
(7) Dual Voice2 Octave
(8) Dual Voice1 Effect Depth
(9) Dual Voice2 Effect Depth
(10) Split On/Off
(11) Split Voice
(12) Split Point
(13) Split Balance
(14) Split Voice1 Octave
(15) Split Voice2 Octave
(16) Split Voice1 Effect Depth
(17) Split Voice2 Effect Depth
• Panel data send requests cannot be received.
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
MIDI Master Volume
• Simultaneously changes the volume of all channels.
• When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don't care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
(18) Split Dumper Mode
(19) Reverb Type 1
(20) Reverb Type 2
(21) Reverb Depth 1
(22) Reverb Depth 2
(23) Effect Type 1
(24) Effect Type 2
(25) Effect Depth
(26) Variation On/Off
(27) Touch Sensitivity
(28) Fixed Data
(29) Left Pedal
(30) Soft Pedal Depth
(31) Absolute tempo low byte
(32) Absolute tempo high byte
(33) Key-Off Sampling Depth
CLP-240/230 Owner's Manual
81