Inserting (Replacing) Batteries - eQ-3 MAX Bedienungsanleitung

6. Inserting (replacing) batteries

1. As-delivered condition
When you are starting up the device for the first time, first
remove the mounting plate (A) on the rear of the wall ther-
mostat (C).
• To do this, hold the MAX! wall thermostat firmly in one
hand and pull off the installation plate at one corner.
2. Installed condition
Once mounted, the MAX! wall thermostat can easily be
pulled out of the frame.
• Pull the wall thermostat (C) off the wall together with the
frame by pulling sideways at the frame.
Change batteries
• Turn the wall thermostat (C) over to remove or insert the
batteries according to the illustration. After removing the
old batteries, please wait approx. 60 seconds before in-
serting the new ones.
• You can now enter two LR03 batteries (Micro/AAA) into
the battery compartment, making sure they are the right
way round according to the drawings
• Put the MAX! wall thermostat (C) back into the frame (B).
37