AEG Protect Home 600 Betriebsanleitung Seite 38

5.7 USB and serial cable (computer) connection
To allow for unattended system shutdown for your operating
system, connect the USB or the RS232 serial cable (both part
of the packing) as shown below. For the USB serial cable just
simply plug into the UPS and PC.
The connection via the USB connector will be auto detected.
5.8 Turn On/Off
To turn on the PROTECT HOME., press the on/off switch.
To turn off the PROTECT HOME., press the on/off switch
again.
5.9 DC Start Function
The DC Start Function enables UPS to be started up when
AC utility power is not available and battery is fully charged.
Just simply press the power switch to turn on the UPS.
5.10 Deep discharge protection
The UPS provides a deep discharge protection function. To
protect the battery the deep discharge protection is activated
before the battery is completely discharged.
To protect yourself never switch on the main
switch when the PROTECT HOME. is not
connected to the mains.
37