Functional Description; Blockage Detection Function; Obstacle Detection Function - RADEMACHER RolloTube I-line Funk Small Bedienungsanleitung

i

Functional description

The RADEMACHER DuoFern RolloTube I-line Radio (ILFS.../ILFM...) series of tubular motors
are designed for opening and closing roller shutters and awnings.
The internal DuoFern interface enables the motor to be integrated into a DuoFern radio
network, making it possible to configure and control many automatic functions remotely
with the help of a DuoFern transmitter (e.g. the DuoFern central operating unit).
An additional switch can be connected to the tubular motor locally in order to enable
manual operation.
These tubular motors are equipped with the new Safe-Drive system for position detection,
torque monitoring and obstacle detection. The drive's compact design and fully automatic
end point configuration ensures for straightforward and convenient installation.
The RolloTube I-line Radio (ILFS../ILFM..) series impresses in daily operation with auto-
matic roller shutter compensation as well as the blockage and obstacle detection system
(with reversing function), ensuring maximum safety and gentle operation.
General tubular motor functions:
◆ Commissioning with a single run command. Self-learning motor with fully automatic
end point configuration.
◆ Safe-Drive method for precise positioning, torque monitoring and obstacle detection.
◆ Blockage and obstacle detection including reversing function.
◆ Obstacle detection can be arbitrarily configured thanks to the new snap-in FlexiClick
system.
◆ Maintenance free end points thanks to automatic shutter length compensation system.
◆ Quick and easy installation thanks to the new shorter design.
◆ Optionally available:
Short description of the DuoFern radio system
The DuoFern radio system enables bidirectional data exchange between the various
participants of a DuoFern radio network. All of the switching commands from the DuoFern
transmitter (e.g. DuoFern central operating unit) are received and acknowledged by the
DuoFern components (actuators / sensors), insofar as both devices are interconnected.
i

Blockage detection function

The tubular motor stops and automatically shifts into the opposite
direction (reversing) in the event that an obstacle is detected while
opening (e.g. if a roller shutter is iced-up).
NOTE
Do not move iced-up roller shutters and rectify the fault or remove the obstacle.
i

Obstacle detection function

The tubular motor stops and automatically shifts briefly in the opposite
direction (reversing) in the event that the roller shutter hits an obstacle
while closing.
34 34
Universal RT ConfigTool for individual configuration of the
motor parameters.
Tubular motor functions in combination with DuoFern transmitters
DuoFern environmental sensor Item No 9475
DuoFern manual central operating unit Item No 9493
RolloTron Pro Comfort DuoFern Item No 980x
DuoFern manual transmitter standard Item No 9491-x
Manual control (on/off)
AUTO/MANU - switchover
Timed program
Timer on / off
Random function
Twilight program (mornings)
Twilight program (evenings)
Darkness control
(mornings and evenings) on / off
Solar program
Automatic solar function on / off
Set solar position
Wind program
Automatic wind function on / off
Set direction of rotation for wind
Rain program
Automatic rain function on / off
Set direction of rotation for rain
Set ventilation position
Set direction reversal
Start connection test
End point adjustment radio controlled
Radio code support
(e. g. log on and log off with radio code)
Requirements for correct obstacle detection:
◆ The catch with freewheel mechanism must be mounted (see Fig. 4.a; page 37).
◆ The roller shutter must be mounted to the rotating union with the fastening springs
or with the fixed shaft connector.
◆ Roller shutters must always run vertically in the guide rails of the window.
EN EN
● ● ●
● ●
● ●
● ●
● ●
● ●
● ● ●
● ●
● ●
● ●
●
●
●
●
●
●
●
●
● ●
● ●
● ●
●