Deleting Measured Values - HMM Diagnostics Smart LAB pressure Bedienungsanleitung

Deleting measured values

If you did not get the correct measurement, you can delete all
results by following steps below. (Take User 1 for example.)
• Hold pressing "
mode, "User ID+dEL ALL" will show and blink.
• Press " "buttontoconfirmdeletingandthemonitorwilldisplay"dELdOnE"and
then turn off.
Note: To exit out of delete mode without deleting any records, press "
pressing " "toconfirmanydeletecommands.
• If there is no record, the following display will show.
52
" button for 3 seconds when the monitor is in the memory recall
z
" button before