Connecting The Cuff To The Monitor; Applying The Cuff - HMM Diagnostics Smart LAB pressure Bedienungsanleitung

3. After selecting the suitable user ID, press "
display "user ID", and then turn off.

Connecting the cuff to the monitor

Insert the cuff tubing connector into the socket of your
smartLAB
pressure on the back side of the monitor. Make sure
®
that the connector is completely inserted to avoid air leakage
during blood pressure measurements.

Applying the cuff

• Place the
• Whileseated,placepalmupsideinfrontofyouonaflatsurfacesuchasadeskor
table.Positiontheairtubeinthemiddleofyourarminlinewithyourmiddlefinger.
cuff around a
"buttontoconfirm.TheLCDwill
bare arm 1-2cm above the elbow joint.
47