Body Posture During Measurement - HMM Diagnostics Smart LAB pressure Bedienungsanleitung

• Pull the cuff end through the metal loop (the cuff is packaged like this already),
turn it outward (away from your body) and tighten it and close the Velcro fastener.
• Thecuffshouldfitcomfortably,yetsnuglyaroundyourarm.Youshouldbeableto
insertonefingerbetweenyourarmandthecuff.
Note:
• Use the same arm for each time you measure.
• Do not move your arm, body, or the monitor and do not move the rubber tube during
measurement
• Stay quiet and calm for 5 minutes before blood pressure
• If the cuff becomes dirty, remove it from the monitor and clear it by hand in a mild
detergent, then rinse it thoroughly in cold water. Never dry the cuff in clothes dryer
or iron it.

Body posture during measurement

Sitting Measurement – Recommended Position
• Sit upright
• Placepalmupsideinfrontofyouonaflatsurfacesuchas
a desk or table, with your elbow resting on a chair or table.
• The cuff should be at the same level as your heart.
• Place your arm on the monitor's plastic case as shown in the
picture, to aid maintaining a correct and still arm position.
Lying Down Measurement
• Lie on your back.
• Place your arm straight along your side with your palm up-
side.
• The cuff should be placed at the same level as your heart
• In case you move your arm and the monitor is not able to
measure correctly, the symbol
48
appears on the display.
measurement