Displaying Stored Values - HMM Diagnostics Smart LAB pressure Bedienungsanleitung

• smartLAB
pressure will automatically turn off after 1 minute. You can manually shut
®
down the monitor by pressing "
• There are two users in total. Each user has a memory of 60 records.
• You can interrupt the measurement by pressing "
and the monitor will turn off.
• If the measurement result is out of the measurement range (SYS: 60mmHg to
230mmHg; or DIA: 40mmHg to 130mmHg; or Pulse: 40-199 pulse/minute), the LCD
will display "out".
Note: The
-symbol indicates that a pulse irregularity has been detected in accordance
with the heart beat during the measurement. This is no cause for concern. If the symbol
occurs frequently, however, it is advisable to seek medical advice. Please note that the
device does not replace a heart examination but is used to detect pulse irregularities at
an early stage.

Displaying stored values

• When the monitor is off, please press "
latest three records. (Note: If the records are less than 3 groups, the LCD will display
the recent record instead. Take user 1 for example.)
• Press " " button or "
50
" after the measurement.
" button to show the average value of the
" button to get the records you want.
". The cuff will then release air