Disposal; After Sale Service; Warranty / Liability - SATA SATAjet 100 B F RP Betriebsanleitung

Operating Instructions SATAjet 100 B F RP/HVLP, B P
Malfunction
Spray gun leaks from
the fluid tip ("fluid tip
aperture").

11. Disposal

Recycle the completely empty spray gun. To protect the environment, bat-
teries and residual paint have to be disposed in an appropriate way and
separately from the spray gun. Please observe local legislation!

12. After Sale Service

Please refer to your local SATA dealer for accessories, spare parts and
technical support.

13. Warranty / Liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA cannot be held liable especially in the following cases:
• When the operating instructions are disregarded.
• When the product is used in other than the intended ways of use.
• When untrained staff is employed.
• When no personal protection equipment is worn.
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly
Cause
Clogged or damaged
paint needle.
Contamination be-
tween paint needle tip
and fluid tip.
Damaged nozzle set.
Corrective Action
Replace nozzle set,
chapter 9.1; replace
paint needle sealing,
if necessary, chapter
9.3.
Clean fluid tip and
paint needle, observe
chapter 8.
Replace nozzle set,
chapter 9.
EN
115