Control Panel - SEVERIN BM3992 Gebrauchsanweisung

CONTROL PANEL

A Display
The display shows the selected programme, level of browning, weight, remaining running time
and programme status. An active programme is indicated by the continuously flashing colon in
the time display.
B Main indicator light
C Programme
Press the
The programme code appears in the display.
D Button
This button starts the selected programme.
A beep signal is heard, and the colon in the time display starts flashing.
To end the programme, keep the button pressed for 3 seconds. This is acknowledged by a beep
signal.
E/F Timer - minus
Programmes 1, 2, 3, 4, 6, 9 and 11 may be started with a delayed timer setting, enabling the
selected programme to finish up to 13:00 hours later.
Example:
You want to start the programme at 20:00, and you would like your bread to be finished at 7:30
the next morning. Accordingly, the total programme running time will be 11 hours and 30
minutes.
- Use the
- Press the appropriate timer button
11:30.
- Add the ingredients following the instructions given in the section Operation. Avoid any
contact between the yeast and fluids or salt.
• Do not use the timer function where a recipe requires the use of perishable ingredients such as
eggs, fresh milk or fruit. The timer function is also unsuitable for recipes which require the
addition of any ingredients (e.g. nuts, grains or dried fruits) during the kneading or rising
phase.
G Browning
Baking programmes 1, 2, 3, 4, 5, 6 and 11 allow for a pre-selection of the desired level of
browning: three settings are available. The level of browning selected is indicated by an
arrowhead in the upper part of the display.
LIGHT
MEDIUM
DARK
QUICK
In addition, a quick-programme can be selected for programmes 1 to 4.
With this setting, the dough processing time is shortened by 60 to 75 minutes.
- button to select the desired programme.
/ Timer - plus
button to select the desired programme.
or until the display shows a total running time of
23