Pre-Tare Function - KERN MCB 300K100NM Betriebsanleitung

11.5 PRE-TARE function

If the tare weight is known (rubber mat, clothing.....) . you may inter the value
manually.
0.0
0
000.0
-1.0
67.0
68.0
MCB_MPT-BAPS-e-1710
Start balance by pressing
Wait for the rest position display
PRE-
TARE
 Press
briefly.
A flashing display appears.
A small arrow will be shown on the display under "PRE-TARE"
and under "NET" as long as the PRE-Tare function is enabled.
The most recently applied value or "000.0" will appear.
 Go to the numeric keypad and enter a new value.
 Confirm value with
The entered value appears on the display with a minus in front.
 Have the person sit or stand on the scales
The weight value reduced by the previously entered tare
value will be shown.
 To return to normal weighing mode, again press the
button.
ON
OFF
.
ENTER
PRE-
TARE
31