Installing The Hood Onto The Wall - Beko HCA92640WH Bedienungsanleitung

3
Installing your appliance
Information required for the preparation of
the installation place for your hood is given
below.
3.2 Installing the hood onto
the wall
To install the hood onto the wall, loosen the
screws of hanger plates on the motor housing and
pull the plates upwards. Then, tighten the screws
of the hanger plates. (Figure 3a).
(Figure 3a)
Externe
External flue connection plate
Kaminschachtanschlussplatte
(Figure 3b)
28 / 230 EN
Secure the Ø 150 mm plastic flue adapter onto the
top of the body with 3.5x9.5 screw included in in-
stallation accessories (Figure 4).
If you will use Ø 120 mm flue pipe, install Ø 120
mm flue adapter onto it.
Hanger plate
(Figure 4)
Hood / User Manual