Storch LP 500 F Bedienungsanleitung Seite 155

LCD display
1. Lower the pressure regulator unit as described above.
2. Release the two nuts in the LCD display assembly and remove the assembly.
3. Re-assemble in reverse order, taking care that the two spacers and the two washers are correctly seated. Tighten
the two nuts hand-tight and lock them with blue Loctite. Do not tighten the nuts too tight to avoid damaging the
display.
INSTRUCTIONS:
The device cannot be operated if cables are missing or kinked. On re-assembly, make sure that all cables are connected
and that they are not kinked.
155 Original instruction