Control Panel; Control Panel / Temperature Setting Buttons - AEG Electrolux SANTO Z 9 18 42-4 i Benutzerinformation

Control panel

1 Pilot light (green)
2 ON/OFF switch
3 Temperature setting buttons (for warmer temperatures)
4 Temperature display
5 Temperature setting buttons (for colder temperatures)
6 FROSTMATIC indicator light (yellow)
• FROSTMATIC for rapid freezing in the freezer compartment
7 Push button for FROSTMATIC
8 TURBO
• TURBO
9 Push button for
Temperature setting buttons
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (temperature display is illuminated) to the dis-
play of the DESIRED temperature (temperature display flashes) by
pressing one of the two buttons, „+" or „-".
• With each further press of one of the two buttons, the DESIRED
temperature is adjusted by 1°C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature.
DESIRED temperature means:
The temperature that is required in the refrigerator, this can be adjust-
ed to the temperatures shown in the display. The DESIRED temperature
is indicated by flashing numbers.
COOLMATIC indicator light (yellow)
COOLMATIC for intensive fridge cooling
TURBO COOLMATIC
The temperature is adjusted using the „+"
(WARMER) and „-" (COLDER) buttons.
Description of the appliance
37