Control Panel; Temperature Setting Buttons - AEG Electrolux S86348-KG Gebrauchsanweisung

Appliance Description

Control panel

1 ON/OFF button
2 Fridge section indicator
3 Temperature indicator for fridge section (not for
LONGFRESH 0 °C cold section)
4 Buttons for setting temperature for fridge section
5 Thermometer indicator for fridge section (with COOLMATIC)
6 MODE button for setting the operating mode
7 Text display
8 RESET button
9 Freezer section indicator
10 Temperature indicator for freezer section
11 Buttons for setting temperature for freezer section
12 Thermometer indicator for freezer section (with FROSTMATIC)

Temperature setting buttons

These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (Temperature display is illuminated) to the dis-
play of the DESIRED temperature (Temperature display flashes) by
pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED tem-
perature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge or the
freezer compartment. The DESIRED temperature is indicated by flashing
numbers.
60
The temperature is adjusted using the
„+" (WARMER) and „-" (COLDER) buttons.
818 42 71-00/8