Hendi 281413 Gebrauchsanweisung Seite 9

Multi stage cooking
This function can be used during manual entry or
programming. The maximum number of stages is
3. To use this function first follow the steps under
'Manual entry'. After setting the time and power
of the first stage press 'time entry' again, the dis-
play shows 'STAGE-2', now input the desired time
and power. If a third stage is needed, press 'time
entry' once more, the display will show 'STAGE-3',
and input the desired time and power. Now press
the 'start' button to start the microwave. Multi stage
input is set in a same manner while in programming
mode. Bellow an example of how this could work:
1) Open the door, then press and hold number "1"
on the number keyboard for 4 ~ 6 seconds, display
will show 'PROGRAM'.
2) Press number button '3', display shows P:03. Af-
ter 2 seconds the display will show the time relat-
ed with the program (standard ':30').
Return to factory settings
To return the microwave back to the factory set-
tings press and hold the 'play' and '0' button until
the buzzer sounds, the display will show 'CHECK'.
When the microwave restored the factory settings
the display will show '11'. If returning to the factory
User options
This microwave allows the user to change some op-
tions. To change first start by opening the door and
press '2' for 5 seconds, the display will show 'OP:--'.
Press the number button related with what needs to
be changed, for example '2'. Now the display shows
'OP:22', keep pressing '2' until the desired setting
is displayd 'OP:20'/'OP:21'/'OP:22' (it cycles trough
3) Press the number buttons '1' '2' '5' to set the
cooking time.
4) Press for the power level of stage 1. The dis-
play will show '1:25 70'.
5) To set the second stage press 'time entry' button,
the display will show 'STAGE-2'.
6) Press the number buttons '3' '3' '0' to input the
time.
7) Press for the power of stage 2. The display will
show '3:30 50'.
8) Press the 'start' button. The multi stage program
is now saved under button '3'.
Note: Total cooking time is limited to 60 minutes
only.
Note: When multi stage cooking is active the micro-
wave shows the total time remaining of all stages.
settings failed the display will show '00', press 'play'
button and the display will now show 'CLEAR' and
the buzzer will sound once, after a check the display
will either show '11' or '00'.
these options). To set the desired setting press
'start'. Now the change is saved. During changing
the options you can cancel this by pressing 'pause'.
The change won't be saved and the microwave will
return to 'door open mode'. Bellow an list of the op-
tions that can be changes, bold printed items are the
preset options.
EN
9