Herunterladen Inhalt Inhalt Diese Seite drucken

Hendi 281413 Gebrauchsanweisung Seite 8

Vorschau ausblenden Andere Handbücher für 281413:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Pause Mode
This mode allows users to pause the cycle to inspect
or stir the food. While the microwave is operating
open the door or press the 'pause' button to pause
the cycle. The display will show the remaining time.
Run program mode
This microwave comes with 10 preset programs.
When the microwave is in 'ready mode' press one
of the number keys and the microwave will run the
program. Below you'll find the 10 preset programs.
Button
Display (Time)
Programming
This microwave can preset up to 99 programs. See
and follow "User options - 9 Double digit" session
for setting program no. from 10 to 99. Open the door,
then press and hold number "1" on the number key-
board for about 4 ~ 6 seconds, the buzzer will sound
and the display will show 'PROGRAM' to indicate you
entered program mode. Select the time with the '
EN
' button, the display will show "00:00", select the
requested time with the number keyboard. After
that, select the power level. Press the power level
buttons [0%/20% (defrost) /50%/70%], the display
will show the selected power. If you press again the
same power level button, the power will be back to
set 100% power . Also, if no power level button is
set, the power will be default to 100%. After setting
the time, power and press the 'start' button to save
the program. The display will show 'PROGRAM'.
Close the door to return to 'ready mode'. If you want
to cancel during programming, press the 'pause'
button and the oven will return to the 'door open'
mode and the program won't be saved.
Below a quick guide how to make a program of 1.25
Double quantity (X2)
This microwave is equipped with a function to cal-
culate the amount of time needed when preparing
a double quantity of food. Press the 'X2' button fol-
lowed by the program and the microwave calculates
8
1
2
3
0:10
0:20
0:30
To resume the cycle, close the door and press the
'start' button. When nothing is done the microwave
will go into idle mode.
When operating the microwave shows the remaining
time in the display, when it's a multi-stage program
the total remaining time will be displayed.
4
5
6
0:45
1:00
1:30
minutes at 70% power:
1) Open the door and press number button '1' for 5
seconds, display will show 'PROGRAM'.
2) Press number button '3', display shows P:03. Af-
ter 2 seconds the display will show the time relat-
ed with the program ':30'.
3) Press the number buttons '1' '2' '5' to set the
cooking time.
4) Press
for the power level. The display will
show '1:25 70'.
5) Press the 'u' button. The program is now saved
under number keyboard '3'.
To overwrite the program repeat the steps above.
Note: Total programming time is limited to 60 min-
utes only.
Note: When the cooking time exceeds the maxi-
mum time the microwave can operate (standard
60 minutes) three beeps will be sound. This means
you need to adjust the time before the program can
work.
how long it will take to prepare a double or triple
quantity" to "double the time you preset and start
the process. This function can only be used in com-
bination with a preset program.
7
8
9
2:00
3:00
4:00
0
5:00

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis